Switching Between Two Channels Using Channel Return; Switching Between Two Channels Using Surflock - Toshiba 32C120U User Manual

Tuning digital channels:
❖
Press the Channel Number (0–9) on the remote control,
followed by the 100 button, and then the sub-channel number.
For example, to select digital channel 125-1, press 1, 2, 5, –, 1,
and then press the ENTER button.
NOTE

Switching between two channels using Channel Return

The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
1 Select the first channel you want to view.
2 Select a second channel using the Channel Number buttons
(and the 100 button if selecting a digital channel).
3 Press the CH RTN button on the remote control.
The previous channel will display. Each time you press the CH
RTN button, the TV will switch back and forth between the
last two channels that were tuned.
NOTE

Switching between two channels using SurfLock™

The SurfLock™ feature temporarily "memorizes" one channel to
the CH RTN button, so you can return to that channel quickly from
any other channel by pressing the CH RTN button.
To memorize a channel to the CH RTN button:
1 Tune the TV to the channel you wish to program into the CH
RTN button.
2 Press and hold the CH RTN button for a few seconds until the
message "Memorized" appears on the screen. The channel has
been programmed to the CH RTN button.
3 You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel will be tuned.
Tuning channels using the Channel Browser™
If a digital channel is not programmed, either through the automatic
channel scan or the Channel add function, see
channels and inputs in the History List" on page
tune the RF channel using the Channel Numbers and the 100 button
on the remote control.
If you press the CH RTN button from a non-antenna input, the TV will
return to the last-viewed input.
Using the TV's features
"Adding and clearing
63
62, you will have to