Using The Auto Aspect Feature - Toshiba 32C120U User Manual

6 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
The adjustment range is from -5 to +10.

Using the Auto Aspect feature

When this feature is set to On, the TV will automatically select the
picture size when one of the following input sources is received:
❖
A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE input
❖
A 480i signal from the ColorStream HD or Video input
❖
480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal from
the HDMI 1 or HDMI 2 input.
Aspect Ratio of Signal Source Automatic Aspect Size (automatically selected
4:3 Normal
4:3 Letter Box
16:9 Full
Not defined (no ID-1 data or
®
HDMI aspect data)
NOTE
To turn on the auto aspect ratio feature:
1 Press the MENU button and open the Picture menu.
2 Highlight Theater Settings, and then press the ENTER
button.
3 In the Auto Aspect Ratio field, select On.
4 To save the new settings, highlight Done, and then press the
ENTER button.
To revert to the factory defaults, highlight Reset and then press
the ENTER button.
To turn off the Auto Aspect ratio feature, Select Off in step 3 above.
when Auto Aspect is On)
4:3
TheaterWide 2
Full
The current picture size you selected, see
the picture size" on page
The auto aspect ratio feature is not applicable to the PC input.
Using the TV's features
Using the Auto Aspect feature
"Selecting
64.
69