Auto Start Function; To Open The Media Player - Toshiba 32C120U User Manual

NOTE

Auto Start function

When Auto Start is enabled, you will be asked if you want to start
the Media Player when a USB device is inserted. If Auto Start is
disabled, you must manually start the Media Player from the menu.
To change the Auto Start setting:
1 Press the MENU button and open the Setup menu.
Press the (
2
press the ENTER button.
Press the ( /
3
Press the ( /
4

To open the Media Player

Auto Start:
1 Gently insert a supported USB storage device to the USB port
on the side of the TV. A prompt will appear.
NOTE
❖
Gently insert the USB device into the port and do not remove
while viewing Media Player.
❖
USB device: USB Mass Storage Class device (MSC)
❖
Connectivity is not guaranteed for all devices.
❖
Connect the USB device to the TV directly.
❖
Do not use a USB Hub.
❖
You must obtain any required permission from copyright owners
to use copyright content. Toshiba cannot and does not grant
such permission.
❖
Depending on the file size and amount in your USB storage
device, it may take some time to load before content is viewable.
A message will display on-screen when files are loading from
the USB storage device.
❖
Only limited types of U3 USB device are supported. Therefore, it
is suggested that you not use U3 USB with Media Player.
❖
Non-supported characters will be replaced with a square.
arrow) button to select Media Player, and then
arrow) buttons to highlight Auto Start.
arrow) buttons to select On or Off.
If you repeatedly insert and remove the USB connector, the prompt
may not appear.
Using the TV's features
Using the Media Player
93