Setting Up Regza-Link; Displaying Tv Status Information - Toshiba 32C120U User Manual

104
Using the TV's features

Displaying TV status information

NOTE

Setting up REGZA-LINK

To access the REGZA-LINK
1 From the Setup menu, highlight REGZA-LINK Setup and
press the ENTER button.
2 Press the ( /
REGZA-LINK.
Press the ( /
3
NOTE
4 Press the ( /
Setup item you want to use, and press the ( /
to select On or the desired mode.
❖
❖
❖
❖
5 To save the new settings, highlight Done and press the ENTER
button.
To revert to the factory defaults, highlight Reset and press the
ENTER button.
Displaying TV status information
To display TV status information using the RECALL button:
❖
Press the RECALL button on the remote control.
The following information will be displayed (if applicable):
❖
Current input (ANT/CABLE, Video, etc.)
❖
If ANT/CABLE is the current input, either "CABLE" (for
cable TV) or "ANT" (for over-the-air broadcasts).
❖
Channel number (if in ANT/CABLE mode)
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver's speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
®
arrow) buttons to highlight Enable
arrow) buttons to select On.
If you select Enable REGZA-LINK
out.
arrow) buttons to highlight the REGZA-LINK
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
Speaker Preference: TV Speakers/Audio Receiver
®
Setup:
®
Off, the other items will be grayed
arrow) buttons