Channel List; Using Regza-Link - Toshiba 42XL700E Owner's Manual

Channel List

1
� The Channel List will appear�
Press
LIST
Channel List
2
Press s or r to select a channel, and then
press to watch�

Using REGZA-LINK

This feature uses CEC (Consumer Electronics
Controls) technology and allows the control of
Toshiba REGZA-LINK compatible devices from
the TV remote control via HDMI connection
(- page 40)�
Note:
Not all Toshiba products currently support
REGZA-LINK.
REGZA-LINK one touch play
When a connected device is turn on REGZA-
LINK will automatically detect the TV through the
input selection� If the TV is in standby it will be
turn on automatically� This feature is selected in
the REGZA-LINK Setup menu�
Note:
Even if the device is showing a menu the TV
may automatically show the video input source
on-screen display.
REGZA-LINK system standby
This feature automatically turns the connected
device into standby when the TV goes into
standby and conversely for the TV to switch
into standby when connected device goes into
standby�
REGZA-LINK system audio control
Using the Speaker Preference feature allows
the TV remote control to adjust the volume or
mute the sound of the speakers connected to the
TV via an AV amplifier�
Ensure that the connected AV amplifier and
REGZA-LINK device are selected in the
input source selection and that the Speaker
Preference is set to Amplifier in the REGZA-
30
Using the TV's features
1
2
3
4
5
6
7
8
9
10
LINK Setup menu or in the Quick Menu
(Speakers)�
Notes:
• When you turn on the AV amplifier, change its
input source, or adjust the sound volume, the
sound will be output from the AV amplifier's
speakers even if TV Speakers has been
selected. Turn the TV first to standby and
on again to output the sound from the TV's
speaker.
• The proper function may not work by operating
AV amplifier.
• The above functions are dependent on the
connected device and TV setting.
REGZA-LINK functions
When the Enable REGZA-LINK is set to On, it
allows the following functions to be enabled by
setting them to On�
• TV Auto Power
If a REGZA-LINK device is turned on or off, the
TV turns on or standby automatically�
• Auto Standby
If the TV is set to standby, the TV will send a
message to turn off the selected REGZA-LINK
device connected to the TV�
• Speaker Preference
From this item, you can set your audio output
preference to the TV speakers or the AV
amplifier speakers� When this item is set to
Amplifier, the TV remote control can be used
to adjust or mute the volume of the audio�
Notes:
• When you turn on the AV amplifier, change its
input source, or adjust the sound volume, the
sound will be output from the AV amplifier's
speakers even if TV Speakers has been
selected. Turn the TV to standby and on again
to output the sound from the TV's speakers.
• The above functions are dependent on the
connected device and TV setting.
To set the REGZA-LINK Setup
1
From the PREFERENCES menu, press s or
r to select REGZA-LINK Setup�
PREFERENCES
REGZA-LINK Setup
Network Setup
Media Renderer Setup
Photo Frame Setup
Teletext
Teletext Language
Panel Lock
Display Settings
Auto
4
Off