Advertisement
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Description #1 screw driver
Description #2
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1.
Remove base scerws 7pcs.
2.
Disassemble base cover from the unit.
3.
Take off 4 pcs of screws which fastening battery to Top_assy. and then disassembly the Battery.
4.
Remove HDD and HDD cable.
5.
Remove KB BL FFC, KB FFC, TP FFC, LCD cable's MB side, Antenna cable's MB side, DB to MB FFC and P/B to DB
FFC.
6.
Remove 2 pcs of screws and disassemble DB.
7.
Remove 6pcs of screws and disassemble the display unit.from top-assy.
8. Loose 1 pcs of screw which fastening P/B and take it off from top-assy.
9. Remove K-lock bkt from top-assy.
10. Remove 6 pcs of screws and disassemble thermal module.
11. Losse 5pcs screws and remove fan cables and 2 fans.
12. Loose 3pcs screws whiching fastening MB on top_assy and take MB off from top-assy.
13. Remove 1 pcsscew and disassemble Wlan module from MB.
14. Remove 1 pcsscew and disassemble SSD module from MB.
15. Remove DC -in cable, DB to MB FFC from MB.
16. Remove RAM module and RTC battery from MB.
17. Disassemble speaker R and L from top-assy.
18. Loose 3pcs screws whiching fastening TP support on top-assy and take off TP support BKT from top-assy.
19. Loose 3pcs screws whiching fastening TP and TP holder assy and take this assy from top-assy.
20. Disassemble LCD bezel from display unit.
21. Remove hinge cap R and L from display unit.
22. Loose 4 pcs of screws which fasetening LCD module from cover and take it off from LCD cover. Before removing LCD
module, separate LCD cable from LCD module.
23. Loose 4 pcs of screws which fasetening Hinge R from LCD cover and remove hinge R from LCD cover.
24. Loose 4 pcs of screws which fasetening Hinge L from LCD cover and remove hinge L from LCD cover.
25. Separate LCD cable from camera module and remove both from LCD cover.
26. Remove antenna cable from LCD cover.
27.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
3.21 Total part disassembly
EL-MF877-00
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
Tool Size (if
applicable)
#1
Page 2
Advertisement
