Table of Contents
Advertisement
EZ Build Assembly and Installation
41130 Drive Pro 6.8 & 7.6 Plow Standard Operating System with E-73 12V Hydraulic Unit
41180 Drive Pro 6.8 & 7.6 Plow Standard Operating System with E-73 12V Hydraulic Unit
Meyer Products LLC reserves the right, under its continuing product
improvement program, to change construction or design details, specifications
and prices without notice or without incurring any obligation.
© 2016 Printed in the U.S.A.
and
www.meyerproducts.com• email info@meyerproducts.com
Form No. 1-1133R
Meyer Products LLC
18513 Euclid Ave. • Cleveland, Ohio 44112-1084
Phone 216-486-1313
May 2016
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Meyer Drive Pro EZ Build 41130
Summary of Contents for Meyer Drive Pro EZ Build 41130
- Page 1 41130 Drive Pro 6.8 & 7.6 Plow Standard Operating System with E-73 12V Hydraulic Unit 41180 Drive Pro 6.8 & 7.6 Plow Standard Operating System with E-73 12V Hydraulic Unit Meyer Products LLC reserves the right, under its continuing product improvement program, to change construction or design details, specifications and prices without notice or without incurring any obligation.
-
Page 2: Table Of Contents
4. The vehicle must be equipped with a “Heavy Duty Battery” (70 Amp, Hr. Min.), 550 C.C.A. and “Alternator” (60 Amp. Min.) to obtain maximum performance 5. Follow these instructions explicitly. Warranty does not apply to a Meyer product which has been negligently or improperly assembled or installed . -
Page 3: Illustrated Parts Lists
• Locknut 3/8-16 Parts indented are included in the carton, bag or assembly under which they are indented. Meyer Products LLC reserves the right, under its continuing product improvement program, to change construction or design details, specifications and prices without notice or without incurring any... - Page 4 41130 and 41180 E-73 Assembly 41180 E-73 41130 E-73 Specific Components Specific Components...
- Page 5 Locknut 1/2-13 Parts indented are included in the assembly under which they are indented. Meyer Products LLC reserves the right, under its continuing product improvement program, to change construction or design details, specifications and prices without notice or without incurring any obligation.
-
Page 6: Attaching Plow To Ez Build Assembly
Attaching Plow to EZ Build Assembly Liberally coat Pivot Pins (60) with Coolube Multi-Purpose Premium Grease Attach Plow Markers (46) to moldboard using 5/16-18 x 1” Bolt (47), 5/16” Part No. 15181. Flatwasher (49) and 5/16-18 Locknut (48) Attach Pivot Bar (6) to Moldboard with Pivot Pins (59), 5/8” flatwashers (57) and insert Cotter Pins (58). -
Page 7: Vehicle Side Wiring Diagram
“C” - GREEN WIRE GROUND WIRE EACH COIL BLACK W/WHITE STRIPE Top off the unit to the fill line on the reservoir with Meyer M-1 Hydraulic Fluid. Assemble adjustable stacking stop bolts to lift frame (13) using 5/8-11 x NOTE: Proper fluid level is to the fill line on the reservoir for the E-73. -
Page 8: Mount Plow System To Vehicle
C. Push back on lift frame until pins spring thru mount on vehicle. D. Adjust crankstand until it is no longer in contact with the ground. G. Remove weather cover on both ends and connect both electrical plugs. Meyer Products assumes no responsibility for installations not made in accordance with these instructions. -
Page 9: Dis-Mount Plow System From Vehicle
G. Disconnect both electrical plugs and install weather cover on both ends. D. Attach crankstand to a-frame. H. Back vehicle away from plow assembly. Meyer Products assumes no responsibility for installations not made in accordance with these instructions. -
Page 10: Pre-Delivery Inspection
PRE-DELIVERY INSPECTION Vehicle Make: Vehicle Model: Vehicle Year: Vehicle VIN#: Vehicle FGAWR: Installing Company: Mounting Type: Plow Type: Drive Pro Hydraulic Serial Number: Moldboard Serial Number: All bolts torqued to specification Plow Operation Up Clevis height Suspension interference Plow Operation Left Clevis height in inches Plow Operation Right Trip springs adjusted... -
Page 11: Hydraulic Unit Drop Speed Adjustment, Wiring And Accessories
White Stripe Right Angle Cylinder Motor Solenoid White Motor Solenoid Purple Please visit http://www.meyerproducts.com/plows/lotpro.aspx for a complete listing of accessories Meyer Products LLC 18513 Euclid Ave. • Cleveland, Ohio 44112-1084 Phone 216-486-1313 (10) © 2016 Printed in the U.S.A.
Need help?
Do you have a question about the Drive Pro EZ Build 41130 and is the answer not in the manual?
Questions and answers