Pry the camera flex up using a pry tool and hold it back with
your thumb.
N
: B
OTE
E CAREFUL NOT TO CONTAMINATE THE ADHESIVE
RING THAT HOLDS THE CAMERA IN PLACE
Pry in the location shown with the tip of the nylon pointer to
pop the ear speaker housing out.
N
: M
OTE
AKE SURE TO ONLY PRY ON THE HOUSING AND NOT
M2
.
THE
READER
N
: A
OTE
T THIS POINT YOU MAY WISH TO ADD A PROTECTIVE
COVER TO THE ADHESIVE RING THAT HOLDS THE CAMERA
2.3.4 Front Screw Removal
Slide the hinge closed slightly to reveal two front screws
and remove them using a JCIS-0 bit.
Slide the hinge more closed to reveal the remaining two
screws and remove them using a JCIS-0 bit.
1211-1553 1
©
Sony Ericsson Mobile Communications AB
.
.
Working Instruction, Mechanical
21(76)