3.2.3 Keyboard Installation
Push the keyboard up into the gap between the phone
halves.
N
: E
OTE
NSURE ANY ADHESIVE RESIDUE IS CLEANED OFF THE
HINGE BEFORE INSTALLING A NEW KEYBOARD
Lay the keyboard down on the keypad FPC and press on
the edges shown so that a good adhesive bond forms.
N
: E
OTE
NSURE THE KEYBOARD EDGE FITS UNDER THE CHIN
.
COVER LIP
3.2.4 Back Screw Installation
Install four back screws in the locations shown. Tighten to
10 Ncm using a JCIS-0 bit.
1211-1553 1
©
Sony Ericsson Mobile Communications AB
.
Working Instruction, Mechanical
36(76)