Working Instruction, Mechanical
3.1.5 LCD Installation
Ensure the LCD shim is installed. If there is no LCD shim,
install one using the features as shown. Line the corner up
with the edges of the hole in the flex. Line the bottom of the
shim up with the edge of the flex.
While holding the LCD as shown, plug the LCD flex
connector into the NeoBon flex connector.
Insert the bottom edge of the LCD into the frame.
Rotate the top of the LCD into place and push the tabs in.
N
: Y
LCD
OTE
OU MAY NEED TO PUSH THE
CUSHION INTO
.
PLACE USING A PRY TOOL
1211-1553 1
29(76)
©
Sony Ericsson Mobile Communications AB