Displaying Tv Status Information; Viewing Support Information; Resetting To Factory Defaults; Power Failure - Toshiba 32TL515U Owner's Manual

Displaying TV status information

To display TV status information:
Press .
The following information will be displayed
(if applicable):
•Current input (ANT/CABLE, Video, etc.)
•Either "CABLE" (for cable TV) or "ANT" (for over-
the-air broadcasts), if ANT/CABLE is the current
input.
•Channel number (if in ANT/CABLE mode)
•Input label (if set)
•Digital signal strength indicator (bar graph in lower
right corner of box; for ATSC signals only)
•Stereo, Mono, or SAP audio status (when in HDMI
input mode, PCM)
•Video resolution
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status (if available)
•GameTimer (if set)
•Channel Label (if set or received)
•Current display mode (Side by Side, Top and Bottom,
or Frame Packing)
•Current display format (3D or 3D to 2D)
•Input video format (3D is displayed when video
format is 3D)
To close the screen:
Press Q again.
The following additional information (only available
for ANT/CABLE input) will display for off-air digital
channels (if applicable):
•Title
•Duration
•Detailed description
To display the next program's information for digital
channels, press Q again. Pressing Q a third time will
remove the entire banner.
ANT
SVGA 16:9
2-2
Nashville WX Channel
Nashville WX Channel provides Middle Tenessee and Southern Kentucky
3D to 2D Side by Side
weather.
Chapter 6: Basic features
NONE
3D
8:59am - 4:59pm EST

Viewing support information

1
> Settings > SETUP > System Information.
2
Press to display support information containing
OK
Web/Customer service numbers for US, Canada,
and Mexico.

Resetting to Factory Defaults

You can reset all settings and channels.
1
> Settings > SETUP > Reset TV >
2
Enter your PIN code (if a PIN code has been set).
3
A confirmation screen appears. Select Yes, and
press . The TV will turn off automatically.
O K
To cancel the reset:
Press C or c to select No. Press

Power failure

If power is lost while you are watching the TV, the
Last Mode Memory feature automatically turns on the
TV when power is restored.
.
O K
.
O K
51