Setting The Auto Input Feature - Toshiba 32TL515U Owner's Manual

Setting the Auto Input feature

You can change TV inputs using the MODE SELECT
buttons on the remote control: TV, CABLE/SAT, BD/
DVD, AUX. After setting an input for a specific MODE
SELECT button, the TV automatically switches to the
input when you press and hold the MODE SELECT
button for about 3 seconds and release it.
Auto Input settings options for each MODE SELECT
button:
Mode Inputs
TV ANT/CABLE
ANT/CABLE, Video 1, Video 2,
ColorStream HD1, HDMI 1, HDMI 2,
CABLE/SAT
HDMI 3, HDMI 4, PC (ColorStream
HD2)
Video 1, Video 2, ColorStream HD1,
BD/DVD HDMI 1, HDMI 2, HDMI 3, HDMI 4,
PC (ColorStream HD2)
ANT/CABLE, Video 1, Video 2,
ColorStream HD1, HDMI 1, HDMI 2,
AUX
HDMI 3, HDMI 4, PC (ColorStream
HD2)
Note: The TV mode select button will be restricted to the
ANT/CABLE input.
To set Auto Input:
1
> Settings > PREFERENCES > Auto Input >
.
OK
2
Set Enable Auto Input to On.
3
Press B or b to select the mode you want to set.
4
Press C or c to select an input source for that mode.
5
Repeat the procedure for other modes.
To turn off Auto Input:
Select Off in Step 2.
To reset Auto Input:
Select Reset. Press .
O K
Chapter 5: Setting up your TV
33