Clearscan 240; Mpeg Nr; Dnr; Auto Brightness Sensor - Toshiba 32TL515U Owner's Manual

™

ClearScan 240

This feature provides smoother motion and a crisper
image.
1
> Settings > PICTURE > Advanced Picture
Settings > .
O K
2
Press B or b to select ClearScan 240.
3
Press C or c to select On. Press
Note: If the Picture Mode is set to Game mode, this feature
is not available.

MPEG NR

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression.
1
> Settings > PICTURE > Advanced Picture
Settings > .
O K
2
Press B or b to select Noise Reduction. Press
3
Press B or b to highlight MPEG NR.
4
Press C or c to select either Low, Middle, High, or
Off. Press .
Note: If the Picture Mode is set to Game or PC, this feature
is not available.

DNR

DNR lets you soften the screen representation of a weak
signal to reduce the noise effect.
1
> Settings > PICTURE > Advanced Picture
Settings > .
O K
2
Press B or b to select Noise Reduction. Press
3
Press B or b to select DNR.
4
Press C or c to select Low, Middle, High, Auto, or
Off. Press .
Note:
• If the Picture Mode is set to Game or PC, this feature is
not available.
• The differences may not always be noticeable. For the
best results, use lower settings, as picture quality may be
greatly reduced if the setting is too high.
Chapter 7: Picture and sound controls

Auto Brightness Sensor

When the Auto Brightness function of Auto Brightness
Sensor is set to On, the TV optimizes the backlighting
levels to suit ambient light conditions.
1
2
.
3
4
Note: When the Picture Mode is set to AutoView, this
feature is automatically set to On and will not be available.

Backlight Adjustment Pro

This feature adjusts the backlight so that it can change
to match the ambient light conditions.
.
OK
1
2
3
4
.
OK
5
Note: If the Auto Brightness Sensor is set to Off, this
feature will not be available.
> Settings > PICTURE > Advanced Picture
Settings > .
O K
Press B or b to select Auto Brightness Sensor
Settings. Press .
O K
Press B or b to select Auto Brightness Sensor.
Press C or c to select On or Off. Press
> Settings > PICTURE > Advanced Picture
Settings > .
O K
Press B or b to select Auto Brightness Sensor
Settings. Press .
O K
Press B or b to select Backlight Adjustment Pro.
Press . The Backlight Control Level screen
O K
appears.
to display the adjustment window. Press C
Press
OK
or c to select the point. Press B or b to adjust the
level. The adjustment range is from 0 to 100.
Backlight Adjustment Pro
Backlight Control Level
100
Control
Level
0
Ambient Light
Press to fix the adjustment.
O K
To cancel the adjustment when selecting a point,
select Cancel on the screen.
To reset the adjustments of all points to the factory
defaults, select Reset on the screen. Press
.
37
Cancel
Reset
.
OK
57