Setting The Auto Input Feature; Setting The Time Zone; Selecting The Location; Selecting The Toshiba Illumination Mode - Toshiba REGZA 46SV670U Owner's Manual

Setting the Auto Input feature

This feature allows you to change TV inputs using the
MODE SELECT buttons—TV, CABLE/SAT, DVD,
VCR/PVR—on the remote control. Once an input has
been set for a specific MODE SELECT button, the TV
will automatically switch to the input when you press
and hold the MODE SELECT button for 4 seconds and
then release it.
Auto Input settings options for each MODE SELECT
button are shown below.
•TV: ANT/CABLE
•CABLE/SAT: ANT/CABLE, Video 1, Video 2,
ColorStream HD1, ColorStream HD2, HDMI 1, HDMI
2, HDMI 3, HDMI 4, PC
•DVD: Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI
4, PC
•VCR/PVR: ANT/CABLE, Video 1, Video 2,
ColorStream HD1, ColorStream HD2, HDMI 1, HDMI
2, HDMI 3, HDMI 4, PC
Note: The TV mode select button will be restricted to the
ANT/CABLE input.
To set Auto Input:
1
From the PREFERENCES menu, highlight Auto
Input and press T.
2
Set Enable Auto Input to On.
Auto Input
Use this menu to enable your TV's automatic input switching feature when
changing modes on your remote control.
Enable Auto Input
POWER
SLEEP
TV
CABLE/SAT
MODE SELECT TV
DVD
CABLE/SAT DVD VCR/PVR
VCR/PVR
3
Press B or b to select the mode field you want to set.
4
Press C or c to select the desired input source for
that mode.
Repeat steps 3 and 4 for other modes and press O.
5
To turn off Auto Input:
Select Off in step 2.
Note: Setting the feature to Off will not cancel any settings;
however, all items will be grayed out.
To reset Auto Input:
Highlight Reset and press T.
Chapter 5: Setting up your TV
On
- -
ColorStream HD1
HDMI 1
Video 1
Reset

Setting the time zone

The Time Zone setup will allow you to specify the
correct time zone for your region. This feature will
allow the TV status information to show the correct
time zone information for your viewing area.
1
From the SETUP menu, highlight TV Settings and
press T.
2
Press B or b to select Local Time Setting and press
T.
3
Highlight Time Zone and press C or c to set your
desired time zone.
4
If you want to activate the daylight saving time,
highlight Daylight Saving Time.
Press C or c to select On and press O.
5

Selecting the location

You can select Home or Store for the TV location. For
normal home use, select Home.
1
From the SETUP menu, highlight Location.
Press C or c to select Home and press O.
2
Selecting the TOSHIBA
Illumination mode
You can set the illumination mode of the TOSHIBA logo
located on the front panel to On or Off.
1
From the PREFERENCES menu, highlight
TOSHIBA Illumination.
2
Press C or c to select either On or Off, then press
O.
39