Advertisement

Configuration guide 

Mechanical PTZ configuration on
the AXIS P135X cameras
This document shows how to configure AXIS P135X cameras to control primarily
a PT head and optionally a zoom lens.

1 Configuration steps

Follow the below configuration steps after connecting the PT head to RS-485/RS-422 serial port
of the camera. Connection schemes are available for particular PT head on driver support pages.
General pin assignment is as follows:
Function
RS-485/RS-422 Tx (A)
RS-485/RS-422 Tx (B)
RS-485A alt. RS-485/RS-422
Rx (A)
RS-485B alt. RS-485/RS-422
Rx (B)
Rev: 1.1, Last updated: 02/04/2013
Mechanical PTZ configuration on the AXIS P135X cameras
Pin
1
(Tx+)
2
(Tx-)
3
(Rx+/Tx+ alt Rx+).
4
(Rx-/Tx- alt. Rx-)
Configuration guide
Notes
Tx pair for RS422 and 4-wire
RS-485
Rx
pair
for
all
(combined Rx/Tx for 2-wire
RS-485)
modes
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P135 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Axis P135 Series

  • Page 1 Configuration guide Mechanical PTZ configuration on the AXIS P135X cameras This document shows how to configure AXIS P135X cameras to control primarily a PT head and optionally a zoom lens. 1 Configuration steps Follow the below configuration steps after connecting the PT head to RS-485/RS-422 serial port of the camera.
  • Page 2 Select your product on the Support pages and go to PTZ driver, see connection schemes and download the driver from there. For availability of other drivers than those on site, contact Axis Support via Online helpdesk. Rev: 1.1, Last updated: 02/04/2013...
  • Page 3 Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras  Upload the driver Upload the PTZ driver and Activate PTZ. Adjust COM port settings (Optional) Adjust COM port settings if needed to agree with the settings of the device connected to the camera: Rev: 1.1, Last updated: 02/04/2013...
  • Page 4 Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras  Enable zoom (Optional) Go to PTZ > Advanced > Controls and enable Zoom in case for example of steering a zoom lens Rev: 1.1, Last updated: 02/04/2013...

This manual is also suitable for:

P1353P1357

Table of Contents