Summary Of Audible Notifications; English Display Touchpads - ADT Safewatch Pro 2000 User Manual

SUMMARY OF AUDIBLE/VISUAL NOTIFICATIONS
SOUND CAUSE
* FIRE ALARM
LOUD, INTERRUPTED
Touchpad & External
* BURGLARY/AUDIBLE
LOUD, CONTINUOUS
Touchpad & External EMERGENCY ALARM
ONE SHORT BEEP a. SYSTEM DISARM
(not repeated)
b. SYSTEM ARMING ATTEMPT
WITH AN OPEN ZONE.
Touchpad only
c. BYPASS VERIFY
ONE SHORT BEEP a. SYSTEM IS IN TEST MODE
(once every 40 seconds)
b. LOW BATTERY AT A
Touchpad only
TRANSMITTER
TWO SHORT BEEPS ARM AWAY
Touchpad only
THREE SHORT BEEPS a. ARM STAY OR INSTANT
Touchpad only
b. ZONE OPENED WHILE SYSTEM
IS IN CHIME MODE.
RAPID BEEPING a. TROUBLE
Touchpad only
b. MEMORY OF ALARM
c. SYSTEM LOW BATTERY
d. EXT. SOUNDER WIRING FAIL.
SLOW BEEPING a. EXIT DELAY WARNING (if
programmed)
Touchpad only
b. ENTRY DELAY WARNING
* If a bell is used as external sounder, fire alarm is pulsed ring; burglary/audible emergency is steady ring .

(ENGLISH DISPLAY TOUCHPADS)

D I S P L A Y
FIRE is displayed; zone number of zone in alarm is displayed. If a fire alarm is
manually activated, zone number 95 will be displayed.
ALARM is displayed. Zone number of zone in alarm is also displayed.
a. READY indicator light comes on.
b. The number of the open protection zone is displayed.
c. Zone numbers of the bypassed protection zones are displayed (one beep is
heard for each zone displayed). Subsequently, BYPASS is displayed.
a. Opened zone numbers will appear.
b. BAT displayed with zone number of transmitter.
AWAY is displayed. Red ARMED indicator is lit.
a. STAY or INSTANT is displayed. Red ARMED indicator is lit.
b. CHIME displayed; zone number of open protection zone will be displayed if the
[ ] key is pressed.
a. CHECK displayed. Zone number of troubled protection zone is displayed.
b. FIRE or ALARM is displayed; zone number of zone in alarm is displayed
c. BAT displayed with no zone ID number.
d. CHECK 70 is displayed.
a. AWAY is displayed.
b. Exceeding the entry delay time without disarming causes alarm.
– 39 –