Parkside PAK 20-Li B2 Translation Of The Original Instructions page 25

equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional star-
ting. Ensure the switch is
in the off-position before
connecting to power sour-
ce and/or battery pack,
picking up or carrying the
tool. Carrying power tools
with your fi nger on the switch
or energising power tools that
have the switch on invites acci-
dents.
d) Remove any adjusting
key or wrench before tur-
ning the power tool on. A
wrench or a key left attached to
a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep
proper footing and balan-
ce at all times. This enables
better control of the power tool
in unexpected situations.
f) Dress properly. Do not
wear loose clothing or je-
wellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long hair
can be caught in moving parts.
g) If dust extraction and
collection devices can be
installed, make sure that
these are connected and
used correctly. Use of dust
collection can reduce dust-rela-
ted hazards.
h) Do not allow yourself to
be lulled into a false sense
of security and do not dis-
regard the safety rules for
power tools, even if you
are familiar with the pow-
er tool after using it many
times. Careless action can
lead to serious injuries within a
fraction of a second.
4) POWER TOOL USE AND
CARE
a) Do not force the power
tool. Use the correct pow-
er tool for your applicati-
on. The correct power tool will
do the job better and safer at
the rate for which it was desi-
gned.
b) Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled with
the switch is dangerous and
must be repaired.
c) Remove the plug from
the wall socket and/or
remove the rechargeable
battery before you chan-
ge the device's settings,
change accessory parts or
GB IE
25