Parkside PAK 20-Li B2 Translation Of The Original Instructions page 24

GB IE
presence of fl ammable
Iiquids, gases or dust. Po-
wer tools create sparks which
may ignite the dust or fumes.
c) Keep children and bys-
tanders away while ope-
rating a power tool. Dist-
ractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must
match the outlet. Never
modify the plug in any
way. Do not use any ad-
apter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching
outlets will reduce risk of electric
shock.
b) Avoid body contact with
earthed or grounded sur-
faces, such as pipes, radi-
ators, ranges and refrige-
rators. There is an increased
risk of electric shock if your
body is earthed or grounded.
c) Do not expose power
tools to rain or wet condi-
tions. Water entering a power
tool will increase the risk of elec-
tric shock.
d) Do not abuse the cord.
Never use the cord for
carrying, pulling or
unplugging the power
24
tool. Keep cord away
from heat, oil, sharp ed-
ges or moving parts. Dama-
ged or entangled cords increase
the risk of electric shock.
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool
in a damp location is
unavoidable, use a RCD
(Residual Current Device)
protected supply with a
rated leakage current of
not more than 30 mA. Use
of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what
you are doing and use
common sense when ope-
rating a power tool. Do
not use a power tool whi-
le you are tired or under
the infl uence of drugs,
alcohol or medication. A
moment of inattention white
operating power tools may re-
sult in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective