Troubleshooting - Silvercrest SLAL 2 B2 Operating Instructions Manual

Troubleshooting

A connected device does not charge
(the operating LED 3 does not light
up white)
No connection to the vehicle socket .
♦
Check the connection .
Depending on the vehicle type, it is pos-
♦
sible that the ignition has to be switched
on first .
The operating LED 3 goes out after
a device has been connected.
The car charger adapter is overloaded
♦
and will no longer charge attached
devices . The internal overcurrent protec-
tion has been triggered . Disconnect all
connected devices from the car charger
adapter . The white operating LED 3
lights up immediately and the car charg-
er adapter is ready for use again .
│ GB │ IE
■ 48 SLAL 2 B2