Silvercrest SLAL 2 B2 Operating Instructions Manual page 49

Insert the car charger adapter into the
♦
12/24 V connection of your car . This
is usually the vehicle socket (cigarette
lighter) on the dashboard of your vehicle .
Many vehicles have a second socket
by the rear seats or in the boot . 24 volt
batteries are often used in lorries or on
boats .
The operating LED 3 lights up white to
♦
signal that the car charger adapter is
being supplied with power . The operating
LED 3 also lights up if no device is
connected . Depending on the vehicle
type, it is possible that the ignition has
to be switched on first .
Connect your device to the car charger
♦
adapter . Use the original USB cable
supplied with your device to optimise
the charging process .
If required, you can switch your connected
♦
device on for further use .
│ GB │ IE
■ 46 SLAL 2 B2