Waterproof Case; Charging The Battery; Getting Started - Rollei Actioncam 9s Plus User Manual

Waterproof Case

• Insert Camera into Waterproof Case
1. Ensure the case is clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4. The camera can be mounted using the accessories provided.
Battery
Before using the device for the first time, you must fully charge the battery.

• Charging the Battery

1. Connect the camera to a computer or USB power supply (5V/2A).
2. The charging status light turns on while the battery is charging.
3. The charging status light turns off when the battery is fully charged.
• Changing the Battery
1. Hold the camera so that you can see the camera display and slide the battery cover to the right to
open the battery compartment.
2. Remove the battery.
3. lnsert the new battery so the contacts line up with those of the camera.
Note: Operation is also possible while charging (e. g. via a power bank).

Getting Started

• Turn On: Press and hold the Power/WiFi Button for 3 seconds. When the camera is turned on, the
Operation Indicator turns on.
• Turn Off: Press and hold the Power/WiFi Button for 3 seconds.
5