Basic settings for the twine wrap device
23 0 7 9
X
29563
1.7 / 6
Needle yoke brake
The needle yoke brake prevents a whip effect in
the needles when in the upper and lower positions.
Setting the needle yoke brake:
Set the spring length on the brake so that dimension
(X) is 2 5 mm.
(Fig. 10)
1 0
Knotter shaft brake
The knotter shaft brake (B) prevents a whip effect
following the return movement of the needles.
(Fig. 11)
1 1
Setting the knotter shaft brake:
Set the springs on the knotter shaft brake (B) so that
the spring length, dimension (X) is 2 5 mm.
(Fig. 11 and 12)
1 2
PLEASE NOTE! The knotter shaft brake is set
correctly if there is still some play available when the
needles are resting between the cam (N) and the
catch (L) .
(Fig. 13)
QUADRANT 2 2 00 / 2 2 00 RC