Restoring From Recovery Dvds/Media - Toshiba A11-EV1 User Manual

72
Getting Started
Recovering the Internal Storage Drive
4 Do one of the following:
❖
❖
5 Click the Create button in the TOSHIBA Recovery Media
Creator utility dialog box.
6 Follow the on-screen prompts to complete the copy process.
NOTE
For information on using the Recovery media you have created with
the preceding steps, see
page 72.

Restoring from recovery DVDs/media

NOTE
If you have created recovery DVDs/media for your system, you can
restore your system from such media, if necessary. For example, if
your original internal storage drive fails, you can restore your
system to a new internal storage drive from your recovery
DVDs/media. For instructions on creating recovery DVDs/media,
see "Creating recovery DVDs/media" on page
If you are copying files to DVD, insert a blank DVD into
the optical disc drive.
If you are copying files to a USB flash drive, connect a
USB flash drive of the required minimum capacity (as
specified in the TOSHIBA Recovery Media Creator
utility) to your computer.
All information stored on your DVDs or USB flash drive(s) will be
erased during the process of creating the recovery DVDs/media. Be
sure to save the information stored on your external media to another
storage device before executing this procedure, or use blank media.
If you are copying the recovery files to DVDs, be sure to label each
DVD in the set sequentially (for example, "1 of 3," "2 of 3," etc.), so
that you will know in which order to insert the discs during recovery.
"Restoring from recovery DVDs/media" on
The recovery process deletes information stored on the internal
storage drive. Be sure to save your work to external media before
executing the recovery (see
During the internal storage drive recovery process it is strongly
recommended that your computer be connected to an external power
source via the AC adaptor.
"Backing up your work" on page
70.
103).