Salicru DC POWER-S DC-36-S User Manual page 3

General index
1. Introduction.
1.1. Acknowledgement letter.
2. Information for safety.
2.1. Using this manual.
2.1.1. Conventions and used symbols.
3. Quality and standard guarantee.
3.1. Declaration of the management.
3.2. Standard.
3.3. Environment.
4. Presentation.
4.1. Equipment views.
4.1.1. Dimensional drawings.
4.1.2. Legends corresponding to the equipment views.
4.1.3. Nomenclature.
5. Single line diagram, description and structural
diagram of the system.
5.1. Single line diagram.
5.2. Description.
5.2.1. Control Module.
5.2.2. Communication Module (COM).
5.2.2.1. Dry contacts.
5.2.2.2. COM ports.
5.2.2.3. Telemaintenance SICRES card (option).
5.2.3. Operating modes.
5.2.4. Cycling function and Smart mode.
5.2.5. Battery.
5.3. Structural diagram as an example.
6. Equipment reception.
6.1. Reception and unpacking.
6.2. Packing list and contents.
6.3. Storage.
7. Installation.
7.1. Operative for inserting and removing modules from the
system.
7.1.1. Inserting or removing a module from a system.
7.2. Take care of your safety.
7.3. To keep in mind.
7.4. Main protective earth terminal or rod (X5) and/or (X5A).
7.5. Connection of the system with the battery set or
cabinet. Terminals (X11) - (X12) and (X47) - (X48).
7.6. Connection to AC mains. Terminals (X1), (X2), (X3) and
(X4).
7.7. Connection of the loads.
7.7.1. No DC outgoing distribution. Terminals (X6) and (X9).
7.7.1.1. Floating output.
7.7.1.2. Output with the positive earthed.
SALICRU
7.7.1.3. Output with the negative earthed.
7.7.2. With DC outgoing distribution. Terminals (X6A.. 6*) and (X9A.. 9*).
7.7.2.1. Floating output.
7.7.2.2. Output with positive earthed.
7.7.2.3. Output with negative earthed.
7.8. Communication module.
7.9. Terminal strip, auxiliary contacts of the protections of
the system.
7.10. Terminal strip, auxiliary contacts of the protections of
the battery cabinet.
7.11. Electrolyte level probe option, terminal (X25A).
8. Rectifier start up and shutdown.
8.1. First commissioning or after a complete shutdown.
8.2. Shutdown of the system.
9. Optical indications of the rectifiers.
9.1. Optical indications.
9.2. Control Module.
10. Maintenance.
10.1. Basic maintenance guide.
10.1.1. Batteries.
10.2. Replacing a rectifier module.
10.2.1. Inserting or removing a module from the system.
10.3. Warranty conditions.
10.3.1. Warranty terms.
10.3.2. Out of scope of supply.
10.4. Technical service networks.
11. Annexes.
11.1. General technical specifications.
11.2. Glossary.
3