Basics; Initial Setup; Power Up; Bottom Of Breeze Pro Sensor - La Crosse Technology V50 Setup Manual

BASICS

Initial Setup

Power Up

Bottom of Breeze Pro Sensor

1. Install 3 "AA" batteries into the Battery Compartment of your Breeze Pro Sensor.
2. Insert the 5V Power Adapter into an outlet, and then plug it into the Power Jack
on the back of the station. Next, remove the Insulation Tab from the station's
Battery Compartment.
Note: It may take up to 10 minutes for your sensor data to appear on your
station's screen.
Back of Station Power Jack
02