Step 1: Power Up; Step 2: Mounting Basics; Step 3: Set Time, Date, Etc - La Crosse Technology 308-1414MB Instruction Manual

Insert batteries (in any order):
• 2-AA batteries into thermo-hygro sensor
• 5 volt power cord (required) into 308-1414MB station
*3-AAA batteries for optional backup of your time and date
Wait until your sensor information should be displayed on your station.
Here are a few quick tips for mounting your sensor:
• Keep out of direct sunlight & ensure the sensor is well-ventilated.
• We recommend mounting under a deck or eave facing north.
• Insert the mounting screw through the front of the sensor and into the wall.
• Tighten the screw to snug (do not over tighten).
• Be sure the outdoor sensor is mounted vertically to drain moisture.
• The maximum wireless transmission range is over 300 feet (91 meters) in open air, not including walls or
floors.
You can manually adjust your station's settings:
1. Hold the TIME SET button for 3 seconds to enter settings menu.
2. Press and release the ARROW buttons to adjust the flashing values. Hold to adjust quickly.
3. Press and release the TIME SET button to confirm and move to the next item.
Wireless Color Weather Station

STEP 1: Power Up

AAA
AAA
AAA
ST E P 2 : Mo un t ing Ba sic s

STEP 3: Set Time, Date, etc.

Page | 3