Using External Display Devices - Toshiba A6 (PTA60U) User Manual

8 Close the Printers and Other Hardware window.
9 Close the Control Panel window.
You can also use a hot key to disable or enable the
TouchPad. See
page

Using external display devices

Your computer comes with a built-in LCD display, but you
can also connect an external display device to the available
video ports:
❖
An external monitor or projector via the RGB (monitor)
port
❖
A standard television, projector, or VCR/DVD player via
the S-video Out port
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and devices.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor's video cable to the RGB (monitor) port
on the left side of the computer.
2 Connect the device's power cable to a live electrical
outlet.
3 Turn on the external device.
4 Set the display mode by pressing
configuring the Display Properties settings.
Using external display devices
"Disabling or enabling the TouchPad" on
252.
Getting Started
, or by
Fn + F5
79