Table of Contents
Advertisement
To avoid damaging the computer's screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
The computer has one memory module slot. You can install
one memory module.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
If the computer is on, begin at step 1; otherwise, skip to step
3.
1
If the computer is on, click Start, then Turn off. (or shut
down - depending on the system)
The Turn off computer window appears.
2
Click Turn Off or Shut Down.
The operating system turns off the computer.
3
Unplug and remove any cables connected to the
computer, including the AC adapter.
4
Remove the main battery. For information on removing
the main battery, see
page
135.
5
Close the display panel and turn the computer upside
down to locate the memory module slot cover.
Getting Started
Adding memory (optional)
"Changing the main battery" on
57
Advertisement
Table of Contents
