Audi R8 LMS 2018 Handbook page 93

4. Calibration throttle pedal
-
Press the throttle pedal to the mechanical stop (full throttle)
– activate status 'calibrate full pressed pedal'
-
Release throttle pedal and/or do not press – activate status
'calibrate release pedal'
-
Reset status to 'calibration inactive'
5. Calibration clutch pedal
-
Pull right clutch paddle to mechanical stop – activate status
'calibrate full-pulled paddle'
 Do not pull clutch paddle – activate status 'calibrate
 Reset status to 'calibration inactive'
-
Pull left clutch paddle to mechanical stop – activate status
'calibrate full-pulled paddle'
 Do not pull clutch paddle – activate status 'calibrate
 Reset status to 'calibration inactive'
6. Checking / basic adjustment gearbox potentiometer
-
Set the gearbox potentiometer to 1.2 volts when Neutral (N)
selected; see also chapter 901 - 1.1 Checking / Adjusting
Gearbox Potentiometer
7. Calibration butterflies
-
Activate status 'automatic calibration'
-
As soon as the calibration is complete reset status to
'calibration inactive'
8. Calibration steering angle sensor
-
Rotate steering wheel 180° to the left – activate status 'cal
left'
-
Rotate steering wheel 180° to the right – activate status 'cal
right'
release paddle'
release paddle'
Version 1 2016-01-01
900- Electric and Data Acquisition
93 / 113