Audi R8 LMS 2018 Handbook page 43

Anti-dive angle
Anti-dive percentage
Anti-squat angle
Anti-squat percentage
Steering rack ratio
Overall steering ratio
Max. rack bar travel
Max. steering angle at
wheel, turning out
Max. steering angle at
wheel, turning in
1)
...The front or rear standard height or ride height is the distance between the road surface and
the under floor and is given at the front and rear axle centre lines (longitudinal position).
The standard FIA heights or FIA ride heights are the distances between the road surface and the
chassis to the FIA measurement points defined in the FIA homologation.
Design level (abbreviation: KL) is the position or the set-up of the car as shown in CAD. It is only
a reference.
400 – Front Axle, Anti-Roll Bar, Dampers and Steering
11.8 °
87 %
-
-
6.747 °/ mm
17
± 41.5 mm
18.4 °
17.7 °
Version 1 2016-01-01
10.2° For 390 mm centre
of gravity height
50% and 60 % front
brake balance
0.5 °
6%
Steering wheel
- angle / rack bar
displacement
Steering wheel
- angle / wheel
angle
Limited by
-
mechanical stop
- Left wheel to left
Right wheel to
-
right
43 / 113