Table of Contents
Advertisement
Image 11: Gearbox – Clutch Bleed Nipple, Oil Level Check, Inspection Openings
f) Service and Maintenance
1.
Please refer to PDM 4SA 300 001 for 902 – Service and
Maintenance Contacts
2.
Gearboxes should be returned for a rebuild after 6,000 km
3.
Alternatively, a training course at HÖR-Technologie can be
attended, which enables customers to carry out rebuilds and
maintenance work (special tools required)
4.
Rebuilds and training courses are implemented and coordinated in
conjunction with Audi Sport customer racing. Please contact
g) Differential
1.
Preload fully adjustable between 50 and 300 Nm (hot)
2.
Adjustment is made via the bolt on the differential housing cover –
remove screw plug in casing – turn the output flange until the
adjustment bolt is visible. Depress preload bolt with special tool
(V03 862 291 AC) and increase preload in clockwise direction. 1 Nm
on the ratchet equals approx. 10 Nm differential preload.
3.
Caution: depending on the oil level and position of car, oil can
escape when the screw plug is removed.
300 – Gearbox, Drive Shafts and Ancillary Components
Kurt Gräfenstein
Kurt1.graefenstein@audi.de
+49 (0) 151 / 421 340 05
Version 1 2016-01-01
38 / 113
Hide quick links:
Advertisement
Table of Contents
