Toshiba A1 User Manual page 57

Installing additional memory (optional)
The following figure shows the inside of the memory
compartment.
Viewing the inside of the memory compartment
6 Remove the memory module from its antistatic
packaging.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
7 Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
8 Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Getting Started
57