Going Into Standby Mode More Quickly - Toshiba A1 User Manual

Sample Stand by window
2 Select Stand by from the drop-down list of options.
3 Click OK.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light blinks amber to indicate the machine
is in Standby mode.
NOTE

Going into Standby mode more quickly

You can also put the computer into Standby mode in three
ways:
❖
By pressing the hot key combination
See
❖
By pressing the power button
❖
By closing the display panel
If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.
"Standby mode" on page
Learning the Basics
Using Standby
Fn + F3.
223.
101