Toshiba A1 User Manual page 59

Installing additional memory (optional)
Do not try to remove a memory module with the computer
turned on. You can damage the computer and the device.
Do not remove the memory module while the computer is in
Standby mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the
above cases, the Standby configuration will not be saved.
The following message appears when you turn on the power:
Warning: Resume Failure
Press Any Key To Continue
If the computer hangs up when you turn it on, perform the
following: Press the power button and hold it down for five
seconds, then turn the power on again.
2 Gently push the memory clips outward until the memory
module pops up.
Removing the memory module
3 Gently pull the memory module diagonally to remove it
from the slot.
4 Complete the procedure by following steps 9 through 13
in "Installing additional memory (optional)" on page
Getting Started
59
54.