Going Into Standby Mode More Quickly - Toshiba M205-S810 - Portege - Pentium M 1.5 GHz User Manual

2 Click Stand By.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light (
machine is in Standby mode.
If you are connected to a Windows
server), power down the computer using the Standby
command as follows:
1 Click the Start button, then select Shut down.
The Shut Down window appears.
2 Select Stand by from the drop-down list of options.
3 Click OK.
The computer saves the state of all open programs and files to
memory, turns off the display, and goes into a low-power
mode. The on/off light blinks amber to indicate the machine
is in Standby mode.

Going into Standby mode more quickly

You can also put the computer into Standby mode in three
ways:
❖
By pressing the hot key combination Fn+F3.
❖
By pressing the power button
❖
By closing the display panel.
If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure
to save your work often.
Enhancing Productivity
Using Standby
) blinks amber indicating the
®
network server (domain
155