Using Hibernation; Enabling The Hibernation Command; Going Into Hibernation Mode - Toshiba M205-S810 - Portege - Pentium M 1.5 GHz User Manual

Using Hibernation

Enabling the Hibernation command

Hibernation is a default setting. If it should become disabled,
you can enable it as follows:
1 Right-click the mouse on the Toshiba Power Saver icon
located in the System Task Tray.
2 Click Hibernate.
3 Click Enable.

Going into Hibernation mode

If you are not connected to a Windows
(domain server), power off the computer using the
Hibernation command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.
Sample Turn off computer window with Shift key held down to
show Hibernate option
2 Hold down the shift key and click Hibernate
("Hibernate" only appears when the Shift key is pressed).
The computer saves the state of the system, including all open
programs and files, to the hard disk, and then powers down
completely.
Enhancing Productivity
Using Hibernation
®
network server
151