Timer On/Off; Follow Me Function; On/Off Indication; Lock - Midea MRCT-075CWN1-D(C) Technical & Service Manual

MCAC-RTT6S-201701
For cooling only model, the indicator 'HEAT' is skipped.

2. Timer ON/OFF

When adjust setting on time or only on time is set, the indicator 'ON' is lighted.
When adjust setting off time or only off time is set, the indicator 'OFF' is lighted.
If timer-on and timer-off timer both set, the indicators 'ON' and 'OFF' will be both lighted.

3. Follow me function

There is a temperature sensor inside the wired controller, after setting temperature; the
detected temperature by this sensor will be compared with setting temperature. The space
of wired controller will be same as the setting temperature.
It is available under cooling, heating and auto mode.

4. ON/OFF indication

When it is on, the icon will be displayed, otherwise it is extinguished.
5. Fan speed indication (For rooftop packages, it is not available.)
There are four fan modes: low, medium, high and auto. For some models, there is not
medium fan speed, and the medium fan speed is seen as high speed.

6. LOCK

When the 'LOCK' button is pressed, the icon will be displayed and other button is unable.
Press the 'LOCK' again, the icon will be extinguished.
7. Temperature display zone
Generally it displays setting temperature, it can be adjusted by press temperature button
▲and ▼. But in fan only mode, the temperature display zone will be blank.
Midea R410A Tropical ClimaCreator Series Rooftop Package 220V 3Ph 60Hz
96