Midea R410A Tropical ClimaCreator Series Rooftop Package 220V 3Ph 60Hz
Regulating belt of tension
Refer to the following figure, loose 2 bolts, and move the electric motor to adjust belt tension. These
two bolts are used for precision adjustment.
Belt tension is measured by belt tension indicator
Calculate the deflection, deflection (L) = A/64.
Notes: L=A/64
Measure the belt deflection force, the force should be between the values shown in the
following lists.
The belt which is too tight or too loose may generate noise and be harmful to the unit.
Belt section
83
Model
MRCT-100CWN1-D(C)
MRCT-150CWN1-D(C)
MRCT-200CWN1-D(C)
MRCT-250CWN1-D(C)
Small pulley diameter
SPA
80mm~132mm
A (mm)
380
560
580
480
For required to deflection
Newton
25N~35N
MCAC-RTT6S-201701
Kilogram-force
2.5kg.f~3.6kg.f