Midea MRCT-075CWN1-D(C) Technical & Service Manual page 124

Midea R410A Tropical ClimaCreator Series Rooftop Package 220V 3Ph 60Hz
2) OK: In the setting page, press it to send the currently selected mode status and the auxiliary
function status to the selected air conditioner, and display the mode setting operation results.
After select the operation mode and auxiliary function status information of the air
conditioner, if do not press the OK key, the selected information will not be sent to the air
conditioner, and will not affect the current operation of the air conditioner.
The operations of remote controller locking and unlocking need no pressing of the OK key.
The command information is sent directly after the LOCK key is pressed.
3) SET: In other display mode, press this key to enter the setting mode. By default, it is single
setting, and the first in-service air conditioner is displayed. In setting operation mode, press
the key again, and the operation will be performed for all air conditioners in the network.
Press it repeatedly to shift between single setting and global setting.
4) QUERY: Any time when pressing the key, the selected operation mode is to query the
operation status of the air conditioner. By default, the first in-service air conditioner will be
queried. Through the ADD and REDUCE keys, the parameter page can be changed to be
queried. Through the
be changed.
5) : In the query mode, every time when pressing the key, the operation status data of the air
conditioner corresponding to the previous row of the matrix will be displayed. If it is currently
in the first row, press the key, and the data of the air conditioner corresponding to the last
row will be displayed. If this key was held down, the row will decrease one by one. In the
setting mode, every time when press the key, if it is in the single operation mode, the air
conditioner corresponding to the last row will be selected. If it is in the global operation
mode, no effect will result after the key is pressed. In the main page, press the key to enter
the query mode. By default, it is the first in-service air conditioner.
6) : In the query mode, every time when pressing the key, the operation status data of the air
conditioner corresponding to the next row of the matrix will be displayed. If it is currently in
the last row, press the key, and the data of the air conditioner corresponding to the first row
will be displayed. If this key was held down, the row will increase one by one. In the setting
123
, , and keys, the query status of other air conditioners can
MCAC-RTT6S-201701