Toshiba Portégé M100 Series User Manual page 60

60
Getting Started
Installing additional memory (optional)
2 Unplug the computer and remove any cables you may
have connected.
3 Open the display panel and remove the panel that
contains the Power and TOSHIBA Console buttons.
Using a flat head screw driver to pry the panel off
You can pry the panel out of its position by using a flat
head screwdriver. Starting at the left or right side,
carefully wedge the flat head screwdriver between the
panel and the surrounding housing. Grasp the end of the
panel, lift up and wiggle it back and forth until the panel
comes free.
Installing a memory module with the computer's power on may
damage the computer, the module, or both.
When removing the computer's power and TOSHIBA Console
button panel to install additional memory, be careful not to
damage the display or circuit board.