Toshiba Portégé M100 Series User Manual page 180

180
Keeping Your Files Safe
User-level passwords
receive the following message:
"Check system. Then press [F1] key," press
System Setup displays a setup screen.
5 Press
screen.
6 Press the spacebar.
System Setup asks you to enter a new password.
7 Type a password of 1 to 16 characters and press
You may use any combination of letters and numbers in your
password.
8 When System Setup prompts you to do so, verify the
password by typing it again and pressing
If the two passwords match, System Setup displays:
Registered
If the two passwords don't match System Setup displays an
error message. Repeat steps 7 and 8 to enter the password
again.
9 Press
System Setup asks you to confirm your choice.
10 Press
System Setup prompts you to select the type of diskette you
inserted.
11 Press
press
to move to the PASSWORD section of the
P
.
to save your change.
End
to confirm you want to quit.
Y
The System Setup process overwrites all existing information
on the password service diskette. Make sure the diskette you
use does not contain any important information.
if you're using a 1.44 MB diskette or
1
if you're using a 720 KB diskette.
2
F1.
.
Enter
.
Enter