Sound System Problems; Printer Problems - Toshiba Satellite Click 2 PRO User Manual

Hide thumbs Also See for Satellite Click 2 PRO:
Table of Contents

Advertisement

118
If Something Goes Wrong

Sound system problems

Sound system problems
No sound is coming from the device's speakers.
Adjust the volume control.
Try pressing the
Check that the volume control on the device is turned up.
If you are using external headphones or speakers, check that
they are securely connected to your device.
The device emits a loud, high-pitched noise.
This is feedback between the microphone and the speakers.
It occurs in any sound system when input from a microphone
is fed to the speakers and the speaker volume is too loud.
Adjust the volume control.

Printer problems

This section lists some of the most common printer
problems.
The printer will not print.
Check that the printer is connected to a working power
outlet, turned on and ready (on line).
Check that the printer has plenty of paper. Some printers will
not start printing when there are just two or three sheets of
paper left in the tray.
Make sure the printer cable is firmly attached to the device
and the printer.
Run the printer's self-test to check for any problem with the
printer itself.
Make sure you installed the proper printer drivers as shown
in the instructions that came with the printer.
You may have connected the printer while the device is on.
Disable Sleep mode, turn off the device, and turn off the
printer. Turn the printer back on, make sure it is online, and
then turn the device back on.
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad
file prints correctly, the problem may be in your original file.
If you cannot resolve the problem, contact the printer's
manufacturer.
key to see if volume mute is disabled.
F11

Advertisement

Table of Contents
loading

Table of Contents