Download Print this page

Siemens LFE1 Series Datasheet page 4

Burner controls

Advertisement

Standards and certificates
C
Lifecycle
Disposal notes
4/19
Building Technologies
Applied directives:
·
Low-voltage directive
·
Electromagnetic compatibility EMC (immunity) *)
*) The compliance with EMC emission requirements must be checked after the burner control is
installed in equipment
Note!
These devices may only be used as replacements within the EU and EFTA countries.
Compliance with the regulations of the earlier, now withdrawn directives is verified by
the adherence to the following standards:
·
Automatic burner control systems for oil burners
·
Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels
·
Automatic electrical controls for household and similar
use
Part 2-5:
Particular requirements for automatic electrical burner
control systems
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2015
ISO 14001:2015
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
Burner controls has a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to 10 years of usage (starting
from the production date given on the type field).
This lifetime is based on the endurance tests specified in standard EN 230 / EN 298.
A summary of the conditions has been published by the European Control
Manufacturers Association (Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet. After reaching the designed lifetime in terms of the number
of burner startup cycles, or the respective time of usage, the BMU is to be replaced by
authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery.
The unit contains electrical and electronic components and must not be disposed of
together with household garbage.
Local and currently valid legislation must be observed.
2014/35/EU
2014/30/EU
DIN EN 230:2005
DIN EN 298:2004
DIN EN 60730-2-5:2005
CC1N7461en
21.08.2018

Advertisement

loading