Retrospec Chippy Owner's Manual page 4

STEP 4: HANDLEBAR/T-BAR ASSEMBLY
1. Slide Collar Clamp Cover up the T-Bar. Insert T-Bar all the way into the Front Fork
Tube until it stops (Fig. 8).
2. Align handlebar with front wheel. Handlebar curves toward rider (Fig. 9).
3. Tighten Collar Clamp with 13mm wrench.
4. Slide Collar Clamp Cover down over Collar Clamp.
COLLAR
CLAMP
COVER
TIGHTEN
(CLOCKWISE)
Fig. 8
The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from the date of purchase. This Limited Warranty does not cover normal wear and tear, or
any damage, failure or loss caused by improper assembly, maintenance, or storage.
This Limited Warranty will be void if the product is ever used in a manner other than for recreation, modified in any way, or used as a rental.
Retrospec does not o er an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased.
The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. For your records, save your original sales receipt with this
manual.
RIDE AT YOR OWN RISK AND WITH APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION AND COMMON SENSE.
ALIGN
HANDLEBAR
Fig. 9
RETROSPEC LIMITED WARRANTY
RETROSPEC.COM
RIDING:
Place one foot on the deck and push forward with the other foot. Steer with both
hands on the handgrips. Turn handlebar left or right in the direction you wish to travel.
BRAKING/STOPPING:
This product has no brake. Step-o to stop.
CARE
Clean, wipe with a damp cloth. Do not use industrial cleaners, solvents, alcohol or
ammonia-based cleaners – they may damage surfaces and plastic parts. Get in the
habit of inspecting your scooter on a regular basis and before every ride.
(213) 744-1555 TEAM@RETROSPEC.COM