Table of Contents
Advertisement
Using the DVD-ROM or Multifunction drive
The disc tray partially opens.
To avoid damaging a disc or losing data, check that the disc
activity light is off before opening the disc tray.
2
Grasp the disc tray and pull it fully open.
3
Hold the disc by its edges and check that it is clean and
free of dust.
Handle discs carefully. Avoid touching the surface of the disc.
Grasp it by its center hole and edge. If you handle the disc
incorrectly, you could lose data.
4
Carefully place the disc in the empty tray with its label
facing up.
Inserting a disc
Be careful not to touch the drive's lens (located underneath the
drive's spindle) or the area around it. Doing so could cause the
drive to malfunction.
Learning the Basics
87
Advertisement
Table of Contents
