Table of Contents
Advertisement
234
If Something Goes Wrong
Resolving a hardware conflict
Resource conflicts can cause problems when using PC Cards.
See
"Resolving a hardware conflict" on page
Card Information Structure
When you insert a PC Card into a slot, the computer attempts
to determine the type of card and the resources it requires by
reading its Card Information Structure (CIS). Sometimes the
CIS contains enough information for you to use the card
immediately.
Other cards must be set up before you can use them. Use the
Windows
Refer to your Microsoft
information, or refer to the documentation that came with the
PC Card.
Some card manufacturers use special software called
enablers to support their cards. Enablers result in
nonstandard configurations that can cause problems when
installing the PC Card.
If your system does not have built-in drivers for your PC Card
and the card did not come with an operating system driver, it
may not work under the operating system. Contact the
manufacturer of the PC Card for information about using the
card under the operating system.
PC Card checklist
❖
Make sure the card is inserted properly into the slot.
See
PC Cards.
❖
Make sure all cables are securely connected.
❖
Make sure the computer is loading only one version of
Card and Socket Services.
❖
Occasionally a defective PC Card slips through quality
control. If another PCMCIA-equipped computer is
®
XP PC Card (PCMCIA) Wizard to set up the card.
"Inserting PC Cards" on page 212
®
documentation for more
221.
for how to insert
Advertisement
Table of Contents
