210
Exploring Your Options
Using the Modular Bay
icon on the System tray. After the module is stopped, it is
safe to remove.
2
Slide the Modular Bay ejection bar towards the front of
the computer.
Unlatching the Modular Bay
3
Slide the module out of the computer.
Sliding the module out
Never swap modules when the computer is in Hibernation or
Stand By mode. This is known as "warm swapping" and is not
supported with this computer. For more information on
Hibernation and Stand By modes, see
on page 94
and
"Stand By command" on page
"Hibernation command"
95.