Installing additional memory (optional)
6
Remove the memory module from its antistatic
packaging.
7
Holding the memory module by its edges so that the gold
connector bar faces the slot, fit the module into the
socket.
8
Gently put the memory module connector down at an
angle and press down until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
9
Replace the expansion memory slot cover.
10
Replace the screws and tighten them.
11
Turn the computer over and reconnect any cables you
removed.
12
Turn on the computer.
To verify that the computer correctly recognizes the
memory, click Start, Control Panel and click
Getting Started
65