Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Greensmaster TriFlex 3300 Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Width of cut
Overall width
Overall height
Overall length (with baskets)
Minimum ground clearance
(at the machine centerline)
Wheel tread (to the center
of the tire)
Wheel tread (to the outside
of the tire)
Wheel base
Net weight with 8-blade
reels
Net weight with 11-blade
reels

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
Operation
Note:
machine from the normal operating position.
151 cm (59.5 inches)
179 cm (70.6 inches)

Before Operation

205 cm (80.8 inches)

Before Operation Safety

249 cm (98.0 inches)
General Safety
11 cm (4.5 inches)
•
128 cm (50.5 inches)
154 cm (60.5 inches)
119 cm (46.9 inches)
•
633 kg (1,395 lb)
•
664kg (1,463 lb)
•
•
•
•
Fuel Safety
•
•
•
•
•
•
•
19
Determine the left and right sides of the
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
Engage the parking brake, shut off the machine,
remove the key, and wait for all movement to stop
before you leave the operator's position. Allow
the machine to cool before adjusting, servicing,
cleaning, or storing it.
Know how to stop the machine and shut off the
machine quickly.
Check that operator-presence controls, safety
switches, and safety protective devices are
attached and functioning properly. Do not operate
the machine unless they are functioning properly.
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
Use only an approved fuel container.
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
Do not add or drain fuel in an enclosed space.
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
If you spill fuel, do not attempt to start the engine;
avoid creating any source of ignition until the fuel
vapors have dissipated.