Starting Again After Turn Off Or Shut Down; Using Hibernation - Toshiba A10-S100 User Manual

8 Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
9 Do one of the following:
❖
❖
10 Click OK to close the Normal Power Properties window.
11 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.

Starting again after Turn Off or Shut down

To start the computer up again, press and release the power
button. The on/off light turns on.

Using Hibernation

When Hibernation is enabled, you can put the computer into
Hibernation in more than one way.
Click DC only if you want the settings to apply only
when you are using battery power.
Click All for the settings to apply whether you are
using battery power or outlet power.
Learning the Basics
Using Hibernation
103